Forums | Getting Started |
Library |
ESD Protection:All microcontroller modules and chips are susceptible to damage by Electro Static Discharge, and require proper protection procedures for storage and handling. Make sure you are familiar with this issue to avoid damage to your board and possible violation of warranty: ESD Warning |
If you need help with your 68HC11 or 68HC12 application,be sure to check NXP's Support page first,
at https://community.nxp.com/community/s32/16-bit
Then join our support forum: http://www.technologicalarts.net To view archived messages from our old Yahoo Group forum, click this link: techart-micros |
Join one of these groups for help with understanding and applying the MCU in your application. These are very active groups, including users from all over the world. The subscribers range from entry-level to expert, and include NXP engineers. Highly recommended.
Yahoo Groups:
Click the links below to join or view messages: 68HC11 group 68HC12 group |
ICC11 and ICC12 C Compiler Users ImageCraft has a number of groups, including one for users of their C compilers for HC11 and HC12 (icc-mot). https://groups.yahoo.com/neo/groups/icc-mot/info
|
GNU C for 68HC11 Join this group if you are using the GNU open-source C compiler for 68HC11. http://groups.yahoo.com/group/gnu-m68hc11/ JBug11 for 68HC11 Join this group if you are using Jbug11. http://groups.yahoo.com/group/Jbug11/ |
HC12:
Introduction to HC12 Assembler by Han-Way Huang
for Manuals, Data Sheets, Application Notes, Tools, Code Examples, Utilities, etc.